Thank You for Your Purchase!
We’re thrilled you’ve chosen our HTV Vinyl Decal transfers.
Follow these simple steps to apply your design perfectly.
What You’ll Need:
Your HTV Vinyl transfer
Handheld heat press or iron
A flat, heat-resistant surface (e.g., ironing board or table)
Teflon sheet or clean cotton cloth (optional, for added protection)
Application Instructions:
Set your iron to the Cotton/Linen setting (generally the highest temperature setting). Make sure the steam setting is OFF for steam irons.
Prepare Your Item
Lay your clothing, bag, or fabric item on a flat, heat-resistant surface.
Smooth out any wrinkles to ensure an even application.
Use the iron to preheat the area of the material in which you will be applying your cut image for 10-15 seconds.
Position the Transfer
Place the image, liner side up, onto the preheated material.
Apply medium pressure with the iron for 25-30 seconds..
Flip the material over and apply medium pressure with the iron to the back of the material for an additional 25-30 seconds.
Let cool 30 seconds. Remove lining.
Always use a press cloth (or a clean cotton cloth, such as a tea towel) over the top of your material when applying heat. This will protect your base material from the heat of the iron.
Application Tips
Ironing boards with light cushioning are recommended (a firm surface is recommended over significant padding for best results).
Iron with a press cloth or piece of cotton fabric (such as a tea towel) over liner side of the material to protect it from the heat of the iron.
Do not layer on top of a Glitter Iron-on.
If a portion of the image isn’t sticking, replace the liner over the film and re-iron the piece with the iron tip for 10 seconds, moving it back and forth with firm pressure directly over loose edges.
Using the Cotton/Linen setting of the iron provides the best results for most materials. More delicate materials can be protected by using a press cloth or piece of cotton fabric, such as a tea towel.
For steam irons, turn the steam setting OFF when applying Iron-on.
Let Cool.
Allow the item to cool completely before wearing or using it.
Care Instructions:
For longest life, wash and dry the embellished item inside-out.
If there are areas of the Iron-on material which seem to be coming off after being washed, simply re-iron the material in place following the complete application instructions.
Avoid bleach and tumble drying.
