What You’ll Need:

Your rhinestone transfer

Handheld heat press or iron

A flat, heat-resistant surface (e.g., ironing board or table)

Teflon sheet or clean cotton cloth (optional, for added protection)

Application Instructions:

Prepare Your Item

Lay your clothing, bag, or fabric item on a flat, heat-resistant surface.

Smooth out any wrinkles to ensure an even application.

Position the Transfer

Peel the white backing off the transfer sheet to expose the adhesive side.

Place the transfer adhesive-side down onto the fabric in your desired position.

Double-check alignment before proceeding!

Heat Press or Iron

If Using a Heat Press:

Set the temperature to 320°F-340°F (160°C-170°C).

Place a Teflon sheet or cotton cloth over the transfer to protect the rhinestones.

Firmly press the heat press onto the transfer for 10-15 seconds. Apply steady pressure.

If Using an Iron:

Set the iron to medium-high heat (no steam).

Place a Teflon sheet or cotton cloth over the transfer.

Press the iron down firmly for 10-15 seconds.

Do not move the iron; keep it steady.

Check and Repress

Carefully peel back the clear transfer sheet while the design is still warm.

If rhinestones lift with the sheet, reapply the heat for a few more seconds.

Let Cool.

Allow the item to cool completely before wearing or using it.

Care Instructions:

Turn the item inside out when washing.

Use cold water and a gentle cycle.

Avoid bleach and tumble drying.

Thank you for choosing WitardsUK!
Tag us: @witardsuk on TikTok or WitardsUK on Instagram – use #WitardsUk to show off your creations!